Millrock Magnum Series
MAGNUM Pilot Freeze Dryer
Offering up to 20 sq ft (1,85 sq M) of shelf area and a condensing rate of 30 liters, the Magnum Pilot Freeze Dryer stands out amongst the competition. This lyophilizer offers 30% more shelf area than most other units in its class. While the Magnum is commonly used for R&D purposes in the lab, it is the perfect lyophilizer for small scale production.
Our easy-to-use software provides automatic freeze-drying, defrost, system and leak rate testing. Data can be printed either numerically or graphically. This same control system is used on industrial dryers, allowing scaling to production. An interactive maintenance screen simplifies component servicing. All systems are remotely accessible, with customer approval, for troubleshooting process issues.
SPECIFICATIONS
CONTROL SYSTEM
- PC/PLC with ethernet and remote Internet connectivity
- Manual and automatic operating modes
- Graphic and numeric data collection
- Automatic system and leak rate testing
- Options for Protocol Optimization and Controlled Nucleation
SHELF SYSTEM
- Up to 20 sq. ft. (1,85 sq M)of shelf area
- Large shelves for more product capacity – 12″ x 24″ (30,4cm x 61cm)
- Increased stoppering pressure – for 2ml vials
- 316L on all wetted parts
CONDENSER
- 6″(15 cm) vapor port standard
- Exposed coil condenser for maximum efficiency
- Hot gas defrost
REFRIGERATION
- High reliability scroll compressors
- Oversized refrigeration components for high reliability
- CFC-Free, non-proprietary refrigerants
VACUUM
- Pirani vacuum sensor standard
- Vacuum control standard
- Gas backfill standard
- 375LPM corrosion resistant vacuum pump
PORTS
- Sanitary style fittings on all sensor and vacuum ports
- Built-in validation port – sanitary fitting
Note: Specifications subject to change without notice. All specifications based on 20C ambient on 60Hz.
MAGNUM STANDARD FEATURES |
|
|---|---|
| SHELF AREA | 10 sq ft (0,92 sq M) to 20 sq ft (1,85 sq M) |
| SHELF ASSEMBLY | Bulk or Hydraulic Stoppering |
| SHELF TEMPERATURE RANGE | -45ºC or -70º to + 65°C |
| SHELF HEAT TRANSFER | Hollow Fluid Filled |
| SHELF SIZE/FINISH | 12″x 24″(30,4cm x 61cm), 316L, 20 Ra or better |
| VAPOR PORT | 6″ (15 cm) Standard, 8″(20 cm) Option |
| CONDENSER TEMP | -53°C or -85°C |
| CONDENSER CAPACITY | 30L |
| CONDENSING RATE | 20L in 24 hours |
| CONDENSER STYLE | Exposed Coil |
| DEFROST | Hot Gas |
| COMPRESSORS (SCROLL) | 5hp (-53ºC), 3.5hp & 2hp (-85°C) |
| PRODUCT SENSORS | 4, Type T |
| VACUUM PUMP | 375 LPM, Corrosion Resistant |
| VACUUM CONTROL | Pirani w/ Solenoid & Needle Valve |
| GAS BACKFILL | included |
| CONTROL SYSTEM | PC/PLC with Opti-Dry Software |
| TRAYS | One per shelf included |
| CABINET | 46″w x 37″d x 80″h (117 cm x 94 cm x 203 cm) |
| ELECTRICAL | 240V/1ph/50Hz/30A 400V/3ph/50hZ |
VIAL CAPACITY
| VIAL (ml) |
DIA (mm) |
HT (mm) |
# Shelves | |||||
|---|---|---|---|---|---|---|---|---|
| 5 | 6 | 7 | 8 | 9 | 10 | |||
| 2 | 16 | 41 | 3870 | 4644 | 5418 | 6192 | 6966 | 7740 |
| 5 | 22 | 48 | 2015 | 2418 | 2821 | 3224 | 3627 | |
| 10 | 24 | 58 | 1610 | 1932 | 2254 | 2576 | 2898 | |
| 20 | 29 | 71 | 1090 | 1308 | 1526 | 1744 | ||
| 50 | 43 | 81 | 480 | 576 | 672 | 768 | ||
| 100 | 52 | 92 | 325 | 390 | 455 | |||
* Capacity data shown in the above chart is an approximation.
SHELF CONFIGURATION
| Shelves | Spacing (in/mm) |
Area (sq ft/sq M) |
|---|---|---|
| 5 | 5.5 / 139 | 10 / 0.93 |
| 6 | 4.5 / 114 | 12 / 1.1 |
| 7 | 3.75 / 95 | 14 / 1.3 |
| 8 | 3.25 / 82 | 16 / 1.48 |
| 9 | 2.8 / 71 | 18 / 1.67 |
| 10 | 2.5 / 63 | 20 / 1.86 |
BULK FILL
| Depth | 5 | 6 | 7 | 8 | 9 | 10 |
|---|---|---|---|---|---|---|
| 10mm | 9.3 | 11.1 | 13 | 14.8 | 16.7 | 18.8 |
| 15mm | 13.9 | 16.7 | 19.5 | 22.3 | 25 | 27.8 |
| 20mm | 18.5 | 22.3 | 26 | 29.7 | 33.4 | 37.1 |
* Capacity data shown in the above chart is an approximation.
OPTI-DRY® PC/PLC CONTROL
The MAGNUM Series comes complete with PLC controls and a PC for programming and data collection. Our easy-to-use software provides automatic freeze-drying, defrost, and system test. Data can be printed either numerically or graphically. This same control system can be used on industrial dryers, allowing scaling to production. An interactive maintenance screen simplifies component servicing.
OPTI-DRY uses an Ethernet platform for hardware connectivity making data transmission extremely fast. It also provides web connectivity for those who want remote access to their systems.
For R&D, Protocol Development, Small Scale Freeze
Drying Production, Cycle Automation, Opti-Dry offers all the tools you need.
AVAILABLE OPTIONS
- Shelf Latching Kit
- LN2 Trap
- Water Cooled Condenser
- 6″(15 cm) Vapor Port standard, 8″(20 cm) Vapor Port optional
- Water Defrost
- Up to 16 Product Probes
- Capacitance Manometer
- Proportional Vacuum Control
- Dry Vacuum Pump
- Isolation Valve
- Stainless Steel Doors
- Resistivity Probe
- Spider Sample Extractor
- Millrock Reporter – Batch Reporting
- Clean in Place (CIP) Video *** Requires Narrow Configuration
- Clean Room Configuration
- Isolator Interface
- H2O2 Integration Kit
- 21 CFR Part 11 Software
- Validation Documentation
- IQ/OQ Workbook
- FAT/SAT
More information
Need further information?
Don’t hesitate to contact us, our customer service representatives are happy to help! Just fill in the contact form and we will get back to you as soon as possible. Use the link below to get in touch with us.
Get in touch
Contact us
CONTACT NAMES
Stefano Montagnoli - CEO
Mobile Phone: +39 335 8078512
Mail: stefano.montagnoli@pharma-tech.it
Sanesi Paolo - Technical Director
Mobile Phone:+39 348 3345859
Mail: paolo.sanesi@pharma-tech.it